Roofing & Weatherproofing Membranes

Built-up and single-ply roofs lose their seal wherever movement and weather concentrate. UV and thermal cycling break down the bond at penetrations and seams, and once water reaches the substrate the damage spreads underneath the surface.

Our crews apply a cold-applied liquid membrane by brush or roller over the prepared roof, sealing the active drips and restoring a continuous watertight skin. It goes down with no flame and no fumes, which matters when the work sits above a running unit.

The details get the same treatment. Upstands, joints, seams, and roof protrusions are where standing water pools and where movement is sharpest, so they are usually the first features to leak on an otherwise sound roof.

We work a cold-applied membrane into each upstand, joint, and protrusion by hand, following the complex geometry a sheet system never seals cleanly. The penetration that started the leak is wrapped tight, and the surrounding field stays intact.

Rigid coatings split wherever the structure moves. Roof cracks and high-movement detail areas keep working open under thermal cycling, reopening the leak path every season no matter how many brittle patches get laid over them.

We bridge those cracks with a high-elasticity membrane that stretches with the substrate rather than fighting it. The repair holds as the deck keeps expanding and contracting, so this fix does not become next year's callback.

Flashing details fail for a related reason. Gutter linings, parapet copings, and metal flashing meet masonry at a dissimilar-material joint, and that joint opens under combined movement and corrosion until water runs inside.

We seal the metal-to-masonry transition with a flexible cold-applied membrane that follows the movement on both sides. No sheet-metal replacement, and no reroofing. The Belzona 3000 Series products we apply for this work are chosen because they cure cold and flex with the detail rather than crack at it.

Weatherproofing does not stop at the roofline. Exterior masonry and building surfaces pull water in through their own porosity and through fine cracks, and that absorbed water drives spalling, staining, and freeze-thaw damage across the facade.

We coat prepared masonry and exterior surfaces with a breathable waterproof barrier. The wall sheds rain from the outside and still releases trapped vapor from within, so the coating protects the facade without sealing moisture inside the structure where it would do more harm.

The point of every repair here is the same. The roof stays watertight, the asset stays in service, and the production underneath it never stops for a tear-off.

A liquid membrane laid cold over a prepared substrate extends the life of a roof or a wall that would otherwise be on a replacement schedule, and it does that without the cost, the crane traffic, and the open-deck exposure of a full re-roof. No hot work means no permit fight and no fire watch over a live process area.

BHI Coatings holds a strong field safety record, and it reflects how the crews work every day. We can mobilize on the 24-hour line when a leak is active, seal the failure point, and hand back a roof that holds.

Refiners, petrochemical producers, and marine operators along the Texas Gulf Coast use these repairs to push a capital project out by years and keep the building dry in the meantime.