Abrasion-resistant rubber linings and recoating
Sliding and impact wear strips rubber linings off chutes, hoppers, and slurry equipment, exposing bare steel to fast metal loss.
The need for abrasion-resistant rubber linings and recoating
BHI Coatings performs abrasion-resistant rubber linings and recoating across Alvin and the Texas Gulf Coast. Sliding and impact wear strip rubber linings off chutes, hoppers, and slurry equipment. When the lining finally thins through, bare steel takes the abrasion head-on and loses wall quickly. A holed chute or a worn hopper costs product, invites contamination, and forces an unplanned shutdown to pull the part for re-lining.
How BHI Coatings does abrasion-resistant rubber linings and recoating
We recoat worn surfaces and rebuild linings cold and in place, with no hot work. The crew abrasive-blasts the substrate to a clean profile, feathers the sound rubber edges, then trowels a flexible abrasion-resistant elastomer over the wear zone. It happens in the field or in our climate-controlled Alvin shop and cures cold, so the part never leaves service for an oven.
The facility gets renewed abrasion protection on chutes, hoppers, and slurry equipment without sending the part out for OEM re-lining. The line is back on bulk handling inside the same outage.
More Rubber & Elastomer applications
Gouges, rips, and worn top covers on conveyor belts let cargo escape and spread until the belt is scrapped or the line stops.
Learn more →Gasket, seal, and shim castingIrregular flange faces and legacy machinery need gaskets, seals, and shims at thicknesses no catalog part matches.
Learn more →Plastic and rubber pipe repairCracks, splits, and worn sections in plastic and rubber pipe leak product and resist conventional metal repair methods.
Learn more →Rubber fender and component repairImpact and abrasion tear dock fenders, skirting, and molded rubber parts faster than replacement parts can be sourced and shipped.
Learn more →Rubber roller and drive-roller recoveringGlazed, worn, or torn roller covers lose grip and traction, causing slip, mistracking, and dropped throughput on drive and feed rollers.
Learn more →All 6 in Rubber & ElastomerThe whole capability in one place, with the work grouped.
See the capability →Contact BHI Coatings
Have equipment that needs to stay in service?
Tell us what is failing. We respond quickly, and we offer 24-hour on-call service.