HVAC duct and surface corrosion protection
Condensation pools at duct low points and joints, corroding HVAC ductwork from the inside out before the original coating lasts a building life cycle.
The need for HVAC duct and surface corrosion protection
BHI Coatings performs HVAC duct and surface corrosion protection across Alvin and the Texas Gulf Coast. Condensation pools at duct low points, seams, and joints, corroding HVAC ductwork from the inside out. None of it is visible until a wall perforates or a section has to come out, usually well short of the building's design life. Pulling and re-fabricating duct sections disrupts the system and every space it serves.
How BHI Coatings does HVAC duct and surface corrosion protection
We prepare the duct surface, metallic and masonry alike, then apply a room-temperature coating that resists condensate, chemical, and bacterial attack. A Belzona 5111 or 5811 system cures cold, so the work fits inside a scheduled HVAC maintenance window with no flame near the building. Existing ducting gets recoated in place instead of cut out.
Typically applied with Belzona 5111, Belzona 5811, matched to the service conditions.
The ductwork stays in service behind a barrier that holds back the condensation cycle. No duct-replacement project, and the existing system gets more life out of it.
More Corrosion Protection applications
Airborne moisture, salts, and humidity corrode exposed equipment and new machinery before the original coating lasts a full service interval.
Learn more →External pipework and tank corrosion protectionExternal corrosion attacks pipework, valves, fittings, and tank walls at supports, weld seams, and coating gaps until metal loss hits inspection limits.
Learn more →Handrail anchor and fixture re-bondingCorroded or pulled-out handrail anchors and loose fixtures create fall hazards on stairs, walkways, and platforms where the socket has rusted out.
Learn more →Splash-zone, immersed, and underwater corrosion protectionTidal wetting, full immersion, and underwater exposure corrode marine and offshore steel faster than topside surfaces, attacking piles and risers.
Learn more →Structural steel and handrail corrosion protectionWeather, condensation, and atmospheric corrosion strip paint or galvanizing from structural steel, handrails, supports, and skids at edges and welds.
Learn more →All 6 in Corrosion ProtectionThe whole capability in one place, with the work grouped.
See the capability →Contact BHI Coatings
Have equipment that needs to stay in service?
Tell us what is failing. We respond quickly, and we offer 24-hour on-call service.